It is possible to add missing functions via a procedure known as “Key Magic.”
If you provide the relevant information via this web form we will supply a 5 digit code to be programmed for each missing function and the programming procedure.
It is also possible to learn a missing function, using your original remote. To learn the requested functions on your One For All remote, please follow the instructions mentioned below:
- Hold down the digits 1 and 3 until the red LED blinks twice.
- Press and release the key you want to learn a function onto (for example the TV Power key). The red LED will blink continuously.
- Press and hold the key on the original remote control that you wish to learn until the LED on the One For All remote blinks twice
- Repeat steps 2 and 3 if you want to learn more keys.
- When you have learned all the functions you require, press and hold the OK key until the red LED blinks twice.
Additional information:
- If the red LED shows one long blink at step 4, the function was not learned correctly. Please try again from step 2.
- If you find one or more keys don't work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.
